Efficient drainage is very important for the sewage system, both for the house and the lawn. A drainage pipe is one of the most important components of the drainage system; without a good drainage pipe, sewage system problems range from leakiness to a bad stench to harm to plants. A poorly laid drainage pipe also makes a fertile breeding ground for termites and insects. Does this Spark an idea?
Selecting a Pipe
Installing a drainage pipe takes time, effort and planning. It is the key to a good drainage system, which in turn is where proper water flow starts. The first step to installing a drainage pipe starts is selecting the drainage system. There are many kinds available. Select the right type depending on the intended use. For homes, a simple one with perforated or non-perforated ridges will do. For heavier uses, such as for landscaping, an ADS solid pipe is necessary.
Installing the Pipe
The next step is to dig trenches from the connecting or the starting point of the drainage system to the end. The starting and ending points, once determined, are the locations into which you have to fit the pipe. The starting and ending points usually span the length of the drainage system, which starts at a place in the house or lawn and ends at an outside sewage receptacle where the water is drained out. Dig the trenches from the start to the end. Once this is done, dig a slope into the trenches so when the pipe is laid, the flow of water is easy and unclogged. It is advisable to keep the formula of sloping at approximately one and a half inches for every 50 feet of running water.
Trenches
The pipe has to be laid into the trenches so it can take water from the start of the drainage system and take it out at the other end. The next step is to cover the trenches up. When done neatly, you can grow grass on this covered area. This means there is no trace of the pipe. This is the hallmark of an efficiently laid drainage pipe.
Tags: drainage system, drainage pipe, drainage system which, ending points, from start