Circulating hot water in a baseboard hot water system is easy.
One of the most common types of heating systems in use today in both commercial and residential buildings around the world is the baseboard hot water system. It works by circulating hot water through pipes that are surrounded by a metal casing complete with adjustable vents for directing the heat around the space. It is efficient, cost-effective and easy to maintain. Knowing circulate the water through the heating system allows it to work to heat your space efficiently. Does this Spark an idea?
Instructions
1. Bleed the system at the start of the heating season. Turn the heat on for an hour, and turn it off. Locate the bleed valve at the base of the main system tank. Turn the bleed valve counterclockwise. A hissing sound signals that air is bleeding out. Turn the valve off once water starts coming out of the bleed hole steadily, which means all the air has been removed.
2. Return to your basement where the main system tank is located. Find all valves to the heating system. Usually there is a valve for each floor of the building, and they will be labeled as such.
3. Check each valve to be sure it is open. The handle should be turned counterclockwise as far as it can go.
4. Turn the thermostat on the lowest floor up to high. Leave it on for 30 minutes, and turn it completely off. Move to the next floor, and repeat the process. Continue in this fashion until you have reached the highest floor, at which point hot water will have circulated throughout the entire system.
Tags: baseboard water, baseboard water system, bleed valve, heating system, main system